Meishel 2.0 Motor
$3.00
Meishel 2.0 130 Motors by FoamBlast
The return of affordable and plentiful 2s motors is upon us with the Meishel 2.0 motor. Designed to closely replicate the original Meishel motors, but with a slightly lower RPM to better align with the sweet spot for flywheel friction, and increased torque for faster spin-up. This motor features a vented housing to aid in dissipating heat. Designed and tested to meet or exceed the performance of the originals. Meishel motors are not recommended for use with very high crush cages.
Motor specs (@7.4 volts):
– 6 volt operation Ideal for a 2s LiPo battery. Listed specs are at 7.4V
– 33,000 RPM.
– 357 g.cm of Torque
– 18.8 Amp stall current means a suitable high amperage battery is required.
These 6 Volt motors should be suitable for running from a 2s LiPo pack or 6V to 7.2V NiMH Packs.
130 sized upgrade motors for most flywheel blasters with out the need for shell modifications.
FoamBlast officially recommends not running these motors on a 3s LiPo as this can reduce their lifespan.
Please note that these are not drop in replacements electrically for the standard 130s in most blasters. They are intended to operate at around 6V and are capable of high current draws, as such they are intended to be used with high current Lipo / Li-ion / NiMH packs with appropriate gauge wiring (16 gauge or larger should be suitable). These motors are sold individually.
17 in stock
Product Info and some images courtesy of FoamBlast