Lipo Battery Indicator (2S or 3S)
$3.00
These battery indicators give you a quick and intuitive way of knowing if your LiPo is good to go or needs a charge. Outside ring around battery shape illuminates red, and the inner bars illuminate blue. This must be wired into your loom directly. Can have a switch added to either the black or red wire to serve as a cutoff.
Bars will illuminate accordingly:
2S
- 7.8V or higher, 4 bars will illuminate.
- 7.4V or higher, 3 bars will illuminate.
- 7.0V or higher, 2 bars will illuminate.
- 6.6V or higher, 1 bar will illuminate.
- 6.5V or lower, All bars will be off, only red indicator ring will illuminate.
3S
- 11.7V or higher, 4 bars will illuminate.
- 11.1V or higher, 3 bars will illuminate.
- 10.5V or higher, 2 bars will illuminate.
- 9.9V or higher, 1 bar will illuminate.
- 9.8V or lower, All bars will be off, only red indicator ring will illuminate.
Product Info and some images courtesy of FoamBlast
WARNING: Blaster modification products are not toys and as such are not suitable for use by children without direct adult supervision. Modifying any blaster is done at your own risk. Neither Containment Crew, the manufacturer of the modification product, nor the blaster’s manufacturers are liable for any damage or injuries resulting from the use of a modified blaster or the modification process itself. Always take appropriate precautions to avoid injury when modifying or using modified blasters.
NOTICE: Use of modification kits or other aftermarket modification parts may dramatically increase the wear and tear on your blaster and may cause parts to break or otherwise fail significantly faster than under normal use. By purchasing this product you agree that you understand and accept this risk.
Containment Crew is not affiliated with any blaster manufacturer.
