Blasterparts Precision Flywheels

$14.00

Electronic Nerf-Blasters deserve more love than just more power…

…we said to ourselves and got our hands on the core piece of the so-called Flywheel blasters. The most characteristic flaw in all Flywheel Blasters is the typical blow dryer-sound, which can get as loud as an industrial vacuum cleaner, especially with a Voltage Mod installed.

The problem: Injection molding, the process that Hasbro uses to fabricate most of their parts, doesn’t allow for the needed precision to create balanced flywheels. That’s why our wheels are lathed at a German turning shop. The almost perfectly balanced flywheels generate a lot less vibration and noise especially when reaching higher speeds.

Reasons to upgrade your blaster with Precision Flywheels:

  • Drastic noise reduction especially in modded blasters when installed correctly
  • Improved accuracy and velocity
  • More consistent muzzle velocity
  • Difficulty of installation: moderate

Compatibility:

The Blasterparts Precision Flywheels were tested and approved to work with (as of Summer 2016):

  • Nerf N-Strike Elite (XD) Stryfe
  • Nerf N-Strike Elite (XD) Rapidstrike CS-18
  • Nerf N-Strike Elite (XD) Cam CS-12
  • Nerf N-Strike Elite (XD) Stockade
  • Nerf N-Strike Elite XD Rhino-Fire
  • Nerf N-Strike Elite Hyperfire
  • Nerf N-Strike (Elite) Rayven CS-18
  • Nerf Rebelle Rapid Red
  • Nerf Rebelle Fearless Fire
  • Nerf N-Strike Elite (XD) Modulus Blaster ECS-10
  • Nerf Doomlands Impact Zone Desolator
  • Nerf Star Wars Rogue One Jyn Erso Deluxe Blaster

They will NOT work with:

  • Nerf N-Strike Elite XD Demolisher 2 in 1

General Installation:

Installing new flywheels is pretty much the same process in every model (only the Barricade and Stockade need a little trickery). The flywheel cage is located directly in front of the magwell and is fastened with 4 screws. After opening up the cage, the original flywheels can be pried off gently, using a small screwdriver.

When press fitting the new wheels, make sure to support the back of the motor shaft to prevent damaging the motor or the rubber pads behind the motors.

Note: Blasterparts modification products are not toys. Not suitable for children! The installation of the mod kit causes a significant increase in performance. The offered modification kits are NOT products of the manufacturer of the mentioned blaster. There is no relationship to the manufacturer of the mentioned brand.

10 in stock

Product Info and some images courtesy of BlasterParts.
Claims of blaster performance are made by blasterparts.com and have not been tested or verified by ContainmentCrew.
Modification of dart blasters is not supported by the original manufacturer and done at your own risk.

WARNING: Blaster modification products are not toys and as such are not suitable for use by children without direct adult supervision. Modifying any blaster is done at your own risk. Neither Containment Crew, the manufacturer of the modification product, nor the blaster’s manufacturers are liable for any damage or injuries resulting from the use of a modified blaster or the modification process itself. Always take appropriate precautions to avoid injury when modifying or using modified blasters.
NOTICE: Use of modification kits or other aftermarket modification parts may dramatically increase the wear and tear on your blaster and may cause parts to break or otherwise fail significantly faster than under normal use. By purchasing this product you agree that you understand and accept this risk.
Containment Crew is not affiliated with any blaster manufacturer.
SKU: bp-1301 Categories: , Tags: , ,

Related products