Sirocco Hardware Kit

Ready to be blown away!?
A collaboration between Detroit Dartworks and Containment Crew, the Sirocco is a talon-fed flywheel blaster that delivers customizable performance, a buttery smooth geared pusher, and an innovative dual trigger setup. Whether it’s HvZ, Competitive PvP, or a backyard war, you choose the motor and flywheel combo to build your blaster to the performance you want.
Play at multiple fps levels? With the swappable cage, a few screws allows you to go from 100 fps to 180 fps to suit your needs while the integrated BCAR and PCAR options keep your shots on target.

This Is a hardware only kit so you can print and build your own Sirocco Blaster. It includes the following:

24 – heat-set inserts (m3 x 5mm(OD) x ~4-6mm(Length))

23 – m3 x 8mm button head screws

1 – m3 x 8mm Thumb Screw

4 – m2 x 5mm flathead screws (motor screws)

3 – springs (5mm x 0.5mm x 25mm) (For Trigger, Mag Release, & Optional Rev Trigger)

Tiny bit of 1.75mm filament to act as a pin for the pusher roller

1- omron style switch 15A

1 – XT-30 connector M/F pair (for swappable motor cage)

1 – XT-30 Female connector (for Lipo)

Heat shrink (to cover solder joins at the XT30 connectors)

4ft of 16ga wire

You will need to purchase Flywheels and motors separately. Additionally you will need Bearings and Screws for the BCAR if you want to use that option.